NAT Symbiosis SE Single Ended Integrated Amplifier. The Symbiosis Se is integrated no compromise dual mono hybrid amplifier. There is only two tube and one transistor on signal path. Symbiosis Se contains all audiophile's demands such as last trend-pure single ended operation, without feedback but equipped with remote control unit and well designed DOT-MATRIX display on the front panel. Power output is 100W into 4ohms or 8ohms.
Amplifier has external special switch(on the rear panel) to control bias of output stage (between 4&8 ohms). Recommended loudspeaker impedance must be from 2ohms to 16ohms. Driver stage contains special two double triodes capable to give voltage for output stage. Output stage is made from single high performance FET-industrial grade transistor capable to give peak current of 520A. Damping factor is high 200, yet zero feedback design.
To avoid unnecessary heat from pure class A operation, Symbiosis Se use automatic adaptive bias. Such a product also eliminate miss match or expensive aspect for choosing interconnect cables to connect pre and power amplifier. Standard option Symbiosis Se is equipped with multi-function remote control made from solid block of aluminium. Output connectors - WBT. Attenuator section is made from high reliability relays with gold contacts.
Klik op de afbeelding voor een vergroting
Click picture for magnification
Type Single Ended Hybrid Zero Feedback Power 100 W @4 or 8 ohms
Frequency Response DC to 200 kHz, -3 dB; 20Hz to 20kHz, +/-0,05dB
Noise 96 dB IHF reference to 1W
Gain 35 dB (X 55)
Phase status: invert (180 degree)
THD & N <0.1 %
Input Impedance > 15 kohms
Stereo Separation > 95 dB @ 1 kHz
Tube Complement 2 x 6N23P-EV, 2 x ECC85 per unit
Output Impedance < 0.04 ohms (damping factor 200 reference to 8ohms load)
Power Requirements 100VAC to 240VAC (50 to 60 Hz), max. 800 VA
Dimensions 19" (483 mm) wide x 22.2" (565 mm) deep x 16.1" (410 mm) high NET
Weight approx. 137 lbs (62 kg) unpacked TOTAL Weight approx. 181 lbs (82 kg)