PS Audio PowerPlant 15
Beschrijving / Description
The DirectStream Power Plant 15 is the next generation of AC power regeneration. It has 5 separate regenerated zones, buss bar delivery system, and 1500 watts of pure regenerated power. From medium to large power amplifiers to the smallest pieces of source equipment, the P15 will work magic on your system's performance. Expect far better micro and macro dynamics as well as a cleaner, lower noise background. Power regeneration uses active components, like those found in large, powerful audio amplifiers, to rebuild the AC power and produce clean, clear, distortion-free, regulated AC to the equipment. The results are dramatic: unrestrained dynamics even under the loudest passages, an open, wide soundstage that does not collapse with volume and a naturalness to the music that is remarkable. The 7-inch, full color display on the front panel of the P15 allows you to measure distortion, both incoming and outgoing, improvement levels, and power consumption. You can also adjust your settings, such as the turn on/off sequence and the output voltage, as well as turn individual zones on or off, and measure the power quality with either the built-in oscilloscope or the THD analyzer.
Specificaties / Specifications
Location Indoor use only
Duty Cycle Suitable for continuous operation
Moisture Sensitivity Not sealed against moisture
Operating Humidity <80%rh
Storage Temperature -40C to +40C
Operating Temperature 0C to 40C
Max Operating Altitude 12,000' (3500m)
Electrical Supply Nominal Rating 230V 10A 50/60Hz
Unit Dimensions 17 inch W x 14 inch D x 8.5 inch H (43cm W x 36cm D x 21.5 cm H)
Unit Weight 73 lbs ( 33kg)
Shipping Dimensions 23 inch x 20.5 inch x 13.5 inch ( 58cm x 52cm x 34cm)
Shipping Weight 82 lbs (38kg)
Nominal Input Voltage 200 -285VAC
Maximum Continuous Load 1500VA
Maximum Peak Load 3600VA
Voltage Regulation 1V
Output Distortion (Resistive Load) <0.9%
0.2% typical
Output Distortion (Reactive Load) <0.9%
0.2% typical
Output Impedance <0.008 ohm
Noise Reduction 100kHz - 2MHz >80dB
Efficiency @1200 VA >85%
Standby Power Consumption
Input Frequency 45 - 65 Hz
Under Voltage Limit 174V
Over Voltage Limit 275V
Energy Dissipation 3670J
Peak Current Surge 84,000A
Max Surge Voltage 6,000V
Clamp Level 800V
DC Trigger Configuration Tip Positive
DC Trigger Voltage 5 - 15Vdc