Dynaudio Sub 6

The Sub 6 is designed to integrate seamlessly with all Dynaudio speakers and it has a special trick up its sleeve to do just that

It features advanced intelligent DSP technology that tailors its performance so closely to a user's system that it can confidently turn a two-way speaker system in a three-way one. For other models, including non-Dynaudio speakers, the crossover frequency, gain and phase can be set manually.

In charge of its powerful bass response are two brand-new 24cm MSP+ Hybrid Drive units, designed specifically for subwoofers, alongside a 500W power amplifier built into its base. These new drivers sit at either end of the carefully constructed sealed enclosure design, which stands wider than it does deep to help it sit more discreetly against a wall.

The Sub 6 has dual RCA and XLR connections to suit most systems and comes with a number of handy features to help larger and more advanced setups. This includes the ability to set a time-delay to ensure the sub and speakers are working perfectly in sync with one another. All a user has to do is enter the distance from the sub to the speakers and the sub will adjust itself automatically using both time and phase delays. Theres also a fully parametric EQ, including three filters to counter the effects of any room modes, to ensure the best possible performance.

The Sub 6 comes in two finishes

Black satin lacquer
White satin lacquer

And its presets are designed to work with these speakers

Confidence C1
Confidence C2
Confidence C4
Confidence 20
Confidence 30
Confidence 50
Confidence 60
Contour 20i
Contour 30i
Contour 60i
Contour 20
Contour 30
Contour 60
Contour S 1.4 LE
Contour S 3.4 LE

Evidence Temptation
Evidence Platinum
Evidence Master

Evoke 10
Evoke 20
Evoke 30
Evoke 50

Special Twenty-Five
Special Forty
Heritage Special
Focus 20 XD
Focus 30 XD
Focus 60 XD

Why is there no preset for Focus 10/30/50 active speakers When using Sub 6 with these models the subwoofer alignment is controlled by the speaker, not the subwoofer. In this case, the crossover in the Sub 6 should be set to 'bypass'.

When we release new speakers, we'll release a firmware update for the Sub 6, adding their new performance maps so the Sub 6 can work just as closely with our latest models as it does with the classics.

Previous Next

Klik op de afbeelding voor een vergroting
Click picture for magnification

Type Subwoofer
Analog inputs
2x balanced XLR, 2x unbalanced RCA phono
Analog outputs
2x balanced XLR, 2x unbalanced RCA phono
Amplifier Power (Watt) 500W
AC Power Input 100-120 V/200-240 V 50/60 Hz
Auto on/off Yes
Max Stand-by Power Consumption (Watt) 0,5
Max Power Consumption (Watt) 490
Lower Cutoff (Hz @85 dB +/- 3 dB) 16
Upper Cutoff (Hz @ 85dB +/- 3 dB) 230
Box Principle Sealed
Low pass filter Adjustable/Preset
High pass filter Adjustable
Phase adjustment 0/180 degrees
Woofer 2x 23cm MSP Hybrid Drive
Weight kg 21,5
Weight lbs 47 3/8
Width mm 447
Height mm 300
Depth mm 268
Width inches 17 5/8
Height inches 11 6/8
Depth inches 10 4/8
Width mm incl. feet/grill 470
Height mm incl. feet/grill 333
Depth mm incl. feet/grill 268
Width inches incl. feet/grill 18 4/8
Height inches incl. feet/grill 13 1/8
Depth inches incl. feet/grill 10 4/8