NETSPANNING > Netvoeding en filters > Furutech Daytona 303E

Furutech Daytona 303E

Beschrijving / Description

The Daytona: 24-hour protection for A/V professionals and high-performance enthusiasts
All enthusiasts seek the same qualities: verisimilitude to the original event, a sense of engagement that promotes suspension of disbelief, an immersion in the audio-video experience. Effortless participation requires meticulous preparation of the entire playback chain, especially including the AC power supply.

The Daytona 303 is a sophisticated, luxury single-chassis power distributor and filter unit that eliminates many common problems caused by massively contaminated electrical power lines. The AC mains waveform is heavily distorted by ground noise, voltage spikes and dips, high-frequency power supply noise from other components in your own system, plus high-frequency digital noise emitted by digital processors and interconnects.

There are also distortion products at the top and bottom of the AC waveform created by switching power supplies in small electronics and load devices on the same circuit. Plus, you're never alone; your residential AC supply is shared with other apartments, homes, and businesses on the same utility transformer. That's why many audio and video enthusiasts notice that their systems are more enjoyable late at night or on weekends.

Under the hood

Just like a Daytona GT Racer, the Furutech Daytona 303 is purpose-built to protect your audio and video system with 5250 Joules of surge protection plus 3 types of filtering that dramatically reduce induced, radiated and ground-borne noise. Microcircuitry monitors line voltage and instantly disconnects if dangerous over or under voltages occur, then reconnects once power returns to safe levels.

The Daytona also features three sections of ultra-advanced isolation filters, including two analog, two digital, and another pair of ultra-high current audio filters. The Daytona also features 10 surge-protected AC outlets, 6 filtered digital outlets (Filter 1, 2, and 3), plus 2 ultra-high current outlets, 4 unfiltered outlets (Direct 1 and 2). Also 3 pairs of protected coaxial connections, and fully protected 1-in/2-out phone line connections.

On the track

The Daytona 303 relieves your system of flat, harsh and grainy high frequencies, a thick and bloated midrange over woolly bass, a loss of air, detail and sound instability. On video screens, the image resolution is sharper, with no ghosting, colour shifting, snow or vertical and horizontal lines spoiling the view. If this sounds familiar, you need a Furutech Daytona 303.




Klik op de afbeelding voor een vergroting
Click picture for magnification

Specificaties / Specifications

4 filter-free outputs (FT-D15A (R) X 2)
Power Amplifiers (Direct 1 / Zone 3)
Preamplifiers, analog devices (Direct 2 / Zone 2)
6 Filtered Digital Outputs (FP-15A-N1(R) X 3) Transparent Cover (Zone 1)
DVD and DVR (filter 1)
CD, cable and SAT (filter 2)
TV and projector (filter 3)
All Furutech Pure Transmission Receptacles feature non-magnetic (Alpha) phosphor bronze fittings plated with gold.
Beautifully crafted high-quality aluminum panels and painted steel chassis
Effective shielding against RFI (radio frequency interference)
EMI Absorbing Formula GC-303 layer bonded to bottom plate
Effective shielding against EMI (electromagnetic interference)
Internal Wiring: Furutech Alpha-10, 5.5 square inches (10 AWG) for low electrical resistance
Insulated conductors with resonance absorption tubes
Front panel 8 indicators for abnormal operation
Abnormal voltage indicator Red
Zone 1, 2, 3 Green
Correct route indicator for wiring Green
Switch indicator Red
Digital Voltage Meter Red
Digital Ampere Meter Red
Rear panel
Attachable LED light for easy viewing
Three sets of surge-protected coaxial terminals
Surge-protected 3-way telephone connections 2.5GHz coaxial connections
Input x 1 Output x 2
3 remote control triggers
AC 100 - 120V In / DC 3 - 30V In / DC 12V Out
Standard rack mounting plates
Sequence switch
Voltage selector switch for 120V AC (60Hz) or 100V AC (50/60Hz)
Display Dimmer Switch for Display Panel Light or Normal
All conductors treated with Furutech's cryogenic and demagnetizing (alpha) process
Number of outputs 8
Dimensions 400 mm x 130 mm x 60 mm
Weight 1.72 kg

Staat van product / State
Tweedehands / Second hand
Prijs / Price
GERESERVEERD