SPL Phonitor SE
Beschrijving / Description
Entry model into the world of VOLTAiR headphone amplifiers.
The Phonitor se is focused on the essentials without compromising on quality.
It has the same audio signal amplification as its bigger brothers Phonitor x and Phonitor xe.
With the optional DA converter, it can also play from digital sources.
The Phonitor Matrix provides two of the most common Phonitor Matrix settings as switchable presets. It lets you experience music on headphones as being played back through speakers.
Thanks to VOLTAiR technology in the highest sound quality.
The Phonitor se is equipped with gold-plated RCA sockets for the analog input.
The optional DAC768xs adds three more digital sources: USB, COAX und OPTICAL.
PCM audio is received in S/P-DIF format, both coaxial (RCA) and optical (Toslink F06).
Both PCM audio and DSD audio can be converted via USB.
The DAC automatically picks up the sampling rate and resolution of the digital playback source. No matter if a streamer, computer or CD player is connected. No further settings on the Phonitor se are necessary.
The converter chip in the optional digital-to-analog converter is the highly acclaimed AKM AK4490 Velvet Sound premium DAC chip, which thanks to its architecture reproduces the finest sound details.
It converts PCM audio at 32-bit resolution and a sampling rate of up to 768 kHz, which is 16 times the resolution of a CD. Direct Stream Digital is also supported up to a resolution of DSD4 or DSD256.
Unlike the DAC768, which is built into the Director Mk2 for example or available as an option for the Phonitor xe, the DAC768xs does not offer an AES/EBU digital input. The SPL DLP120 with VOLTAiR technology was also not included in the DAC768xs. Nevertheless, it offers a great performance that is unparalleled in this league.
Specificaties / Specifications
Analog input: RCA
Maximum input gain 32.5 dBu
Input impedance 20 kohm
Digital Inputs: DAC768xs (optional)
Coaxial SPDIF (RCA), PCM sample rates
44.1/48/88.2/96/176.4/192 kHz
Optical SPDIF (Toslink F06), PCM sample rates
44.1/48/88.2/96/with Glass fibre <1m: 176.4/192 kHz
USB (B), PCM sample rates
44.1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz
USB (B), DSD over PCM (DoP), sample rates
2.8 (DSD64), 5.6 (DSD128), 11.2 (DSD256) MHz
0 dBFS calibrated to 15 dBu
Standard Headphones Output, 6.35 mm (1/4") TRS Jack
Wiring Tip = Left, Ring = Right, Sleeve = GND
Source impedance 0.18 ohm
Damping factor (40 ohm) 180
Frequency range (0 dBu) 10 Hz - 100 kHz
Crosstalk (1 kHz, 0 dBu) -90 dB
THD + N (1 kHz, 0 dBu) 0.00091 %
Noise (A-weighted) -103 dBu
Output power (1 kHz, 1% THD, 250 ohm) 2 x 5 W
Output power (1 kHz, 1% THD, 32 ohm) 2 x 1 W
Dynamic range 135.5 dB
Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio +/- 60 V
Operating voltage for relays and LEDs +12 V
Mains Power Supply
Mains voltage (selectable, see fuse chamber)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V T 0.5 A
Fuse for 115 V T 1 A
Power consumption max. 30 VA
Stand-by power consumption < 0,3 W
Dimensions & Weight W x H x D (width x height incl. feet x depth)
278 x 57 x 300 mm
11 x 2.24 x 11.81 inch
Unit weight 2,8 kg 6.17 lbs
Shipping weight (incl. packaging) 5 kg 11.02 lbs