T A Criterion Tal 130

Two 19 cm cast-chassis bass units with extra-hard laminated cones drive the transmission line and endow the speaker with enormous pressure in the low bass. As with the larger models, the mid-range/high-frequency assembly is mounted on a de-coupled baffle, and consists of a 13 cm cast mid-range driver with aluminium cone and the new 26 mm woven treble unit. This is the key to the airy, dynamic overall sound so typical of the new Criterion series. As with the other models all three
frequency ranges can be varied to the extent of about +/- 2 dB. The cross-over units are separate for the midrange/high-frequency and bass areas, and this makes it a straight-forward matter to set up bi-amping or bi-wiring.

Previous Next

Klik op de afbeelding voor een vergroting
Click picture for magnification

Principle 3 way transmission line floor-stander
Nominal power rating 130 Watts
Music power rating 170 Watts
Impedance 4 Ohms
Frequency response 32 - 30000 Hz
Sensitivity 90 dB/1 m 2,2 Watst
Bass drive unit 2 x 190 mm
Mid-range drive unit 1 x 130 mm
High-frequency drive unit 1 x 26 mm
Crossover unit, type FSR
Crossover frequencies 250 Hz, 2500 Hz
Bi-amping yes
Dimensions H x W x D 100 x 23 x 36 cm
Weight 26 kg