TA Hifi DAC 200

The DAC 200 is the latest member of an extended family of High-End converters and pre-amplifiers. Every aspect of its design symbolises our uncompromising commitment to science and music. The ability to reproduce DSD 1024 files and its complete galvanic separation are just two highlights which underline the potential of the DAC 200 in impressive style. The DAC 200 is designed to convert a large number of digital formats into natural-sounding analogue signals, and to pass them on via the integral headphone or analogue outputs.

Previous Next

Klik op de afbeelding voor een vergroting
Click picture for magnification

Analogue section
Frequency response +0/3dB 0,1 Hz- 200 kHz

Signal / noise ratio 110/114dB

THD / Intermodulation <0,001%/<0,001%

Channel separation >108 dB

Pre-amplifier outputs
variable:
High level (RCA) 0...2,5 Veff / 22 Ohms, balanced (XLR) 0...5,0 Veff / 22 Ohms
fixed:
High level (RCA) 2,5 Veff / 22 Ohms, balanced (XLR) 5,0 Veff / 22 Ohms
discreetly designed Class A-HV-output stage in Double-Mono-Circuitry

Volume control
Gold contact relays controlled in 1 dB steps, - 90 dB to 0 dB

Headphone output
4.4 mm Pentaconn, discreetly designed high performance output stage, Class A operation up to 200 mA, 6 Ohms output impedance

Analogue inputs
High level (RCA) 250 mVeff ... 4,5 Veff / 10 kOhms

Digital inputs
1 x AES-EBU 32...192 kHz / 16-24 Bit
S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz / 16-24 Bit and DoP DSD64 (0x05/0xFA Marker)
1 x BNC 32...192 kHz / 16-24 Bit
2 x USB DAC: Device-Mode 44,1 ... 768 kSps (PCM) and up to DSD1024*,
supports asynchronous data transfer. *DSD 512 and DSD 1024 with Windows PC and appropriate driver installed or Linux PC with Kernel 4.4 or higher only.
Supports DoP up to DSD 256 (0x05/0xFA Marker).
2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)

D/A converter section
PCM
Double-Differential-Quadruple-Converter with four 32-Bit Sigma-Delta
D/A converter per channel, 705,6 / 768 kSps conversion rate
DSD
T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native bitstream

Upsampling
T+A signal-processor synchronous upsampling with four selectable oversampling algorithms. FIR short, FIR long, Bezier/IIR, Bezier, NOS (non-oversampling)

Analogue filter
Phase-linear Bessel filter 3rd order, switchable with 60 or 120 kHz cut off frequency

Mains
200 - 240 V, 50-60Hz, 30 Watts

Standby <0,5Watts

Dimensions 10 x32x34cm

Accessories

Remote control FM200, power cord, USB cable

Weight 6,2 kg, 13.7 lbs